Fujitsu 5GRUDB3 - Carrier Configuration

2.5
Carrier Conguration
e RU supports 5G-NR carrier conguration as shown in the following table.
Each band has the following available carrier and maximum transmit power:
n70: Up to two carriers, 40 W/port
n66: Up to three carriers, 60 W/port
Note: RU supports a maximum of four carriers and 80 W per port (total 320 W) as the possible combination of
carrier and maximum transmit power.
Table 8
Downlink (n70)
H
1
AWS-4
2
Carrier Power (W)
Total Power
(W)
Power
Density (W/
MHz)
Default Max
C0 C1
1C Downlink
5 MHz — 20.0 n/a 20.0 4.00 x —
5 MHz — 40.0 n/a 40.0 8.00 — x
— 20 MHz 20.0 n/a 20.0 1.00 x —
— 20 MHz 40.0 n/a 40.0 2.00 — x
25 MHz 20.0 n/a 20.0 0.80 x —
25 MHz 40.0 n/a 40.0 1.60 — x
25 MHz 20.0 n/a 20.0 0.80 x —
25 MHz 40.0 n/a 40.0 1.60 — x
25 MHz 20.0 n/a 20.0 0.80 x —
25 MHz 40.0 n/a 40.0 1.60 — x
2C Downlink
5 MHz 20 MHz 8.0 32.0 40.0 1.60 x x
1
H: Bandwidth is 1995…2000 nm and frequency is 5 MHz.
2
AWS-4: Bandwidth is 2000…2020 nm and frequency is 20 MHz.
RU Hardware Feature
Carrier Conguration
31
Release 1.0 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only