- (01-161) -
MULTI TYPE
2, 3, 4 ROOMS TYPE
MULTI TYPE
2, 3, 4 ROOMS TYPE
FUNCTION SETTING
(5) Press the "10°C HEAT" button to access
the fuction setting mode.
(6) Press the "TEMP.
" or "TEMP.
"
buttons to select the function number.
Press the "10°C HEAT" button to switch
between left and right digits.
(7) Press the "POWERFUL" button to proceed
to the setting number.
(Press the "POWERFUL" button again to
return to the function number selection.)
(8) Press the "TEMP.
" or the "TEMP.
"
buttons to select the setting number.
Press the "10°C HEAT" button to switch
between left and right digits.
(9) Press the "MODE" button once to send the
function mode information.
(10) Press the "
/
"
button once to x the
function setting.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No Response
Note: Please push the " / " button within 30 seconds
after pushing the "MODE" button.
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
To Next Page
Loading...
Need help?
General
