Fujitsu ApeosPrint C4030 - Control Panel

6
1 Before Beginning
Control Panel
1 Touch Panel Display Displays messages required for operation, and buttons for
various features.
Note

For the touch panel display, we use a protective film that has
an antibacterial effect.
2 <Power/Power Saver> button Turns the machine on.
Note

While “Please wait…” is displayed, the machine is warming
up. You cannot use the machine during this time.

If the machine does not power on, check that the reset
button is pushed in and the power cable is plugged in.
3 <Home> button Displays the Home screen.
Note

If you press the <Home> button, the settings of all apps in
operations are reset.
4 <NFC> area Hold your NFC-enabled mobile device near this area. The
NFC feature must be enabled on the machine to
communicate with each other.
5 Data LED Blinks when the machine receiving data from a client
computer. This indicator lights up when data is stored in
the machine memory.
6 Status LED Lights green when an operation is accepted. Blinks orange
if an error occurs.
1
6
2
3
54