79
5.3 [App Settings]
[Resume by User] Displays confirmation screen before job is canceled.
Note
When a job is canceled, the subsequent print jobs are limited, and thus
enter the offline state. When the machine is returned to online, printing
of subsequent jobs is resumed.
[When Paper Jam Occurs] Sets print processing method when an error occurs such as a paper
jam during printing.
[Resume Job After Jam
Clearance]
Resumes printing from the next page after the last normally ejected
page when handling of a paper jam is finished.
[Delete Job] Cancels printing, and deletes that print job.
[Print User ID] Enables printing of the user ID when printing using the printer driver.
The first 64 characters of the user ID are printed.
Note
To use the print user ID feature, it is necessary to set the user ID
beforehand with the printer driver.
[Banner Pages] In cases such as when the machine is used by multiple users, this
prints banner pages to separate the jobs of each user, and prevent
mixing of printed materials.
Items such as date, time, user name, and file name are printed on
the banner page.
[Banner Page Tray] Sets tray for supplying papers for sorting (banner pages).
The bypass tray cannot be set.
[PostScript Default Color] Sets PostScript default color.
[PostScript Paper Supply] Enables PostScript deferred media selection at time of paper supply.
To enable deferred media selection, set to [Auto Select], and to
disable, set to [Select Paper Tray].
When printing PostScript data generated by a source other than the
printer driver, the tray may not be selected as intended depending
on the method of defining PostScript data. In that case, set to
[Select Paper Tray].
[PostScript Font Absence] Sets processing when the PostScript font specified in the job is
absent. If the specified font is absent when set to [Substitute Font
and Print], the font is switched to Courier.
[PostScript Font
Substitution]
Enables use of ATCx as a fond substitution when the PostScript font
specified in the job is absent.
[XPS Print Ticket
Processing]
Sets operation of the machine when scanning print setting (print
ticket) defined in an XPS file.
[Off] Print ticket processing is not performed.
[Standard Mode] Performs print ticket processing in standard mode.
[Compatible Mode] Sets print settings defined in print ticket through operation
compatible with Microsoft specifications.
[LPD Print Queue] Sets order of LPD printing.
[Print upon Receipt] Prints data immediately after receipt.
[Data Processing Order] Prints data in the order in which it enters a printable state, after data
is received.
When multiple files are printed consecutively, even if data that
requires time for data processing is received first, data for which
data processing is finished may be printed first.
Item Description
To Next Page
Loading...
Need help?
General
