Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your n otebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbo l on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "
Technical data",
Pag e 82 and "First-time setup of your device", Page 15 before preparing your
notebook for use and s witching it on for the first time.
When cleaning the device, please observe the r elevant notes in the
section "
Cleaning the notebook", Page 14.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manua l.
Please refer to the notes in the chapter "
Removing and insta lling
comp onents during servicing", Page 65.
This notebo ok
complies with the relevant safety re gulations for data processing
equipment. I
f you have questions about using your notebook in a particular area,
please conta
ct you r sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocom pon ent:WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetoot h, UMTS) is integrated in your notebook, you
must be sure to observe the following safety notes w hen using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off t he radio components when you are in a hospital, an operating room or nea r a medical
electronics system. The transmitted radio waves can impair the operation of medical device s.
• Switch off the radio components wh en y ou let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted rad io waves can cause an explosion or a fire.
For information on how to switch radio c ompo nents on and off, see chapter
"
Switch ing the wireless compone nts on and off", Page 44.
12 Fujitsu Technology Solutions
To Next Page
Loading...
