Working with the notebook
Connecting the notebook to the Port Replicator
If you connect the notebook to the P ort Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapt er m ust be connected to the Port Replicator when the
notebook is conne cted to the Port Replica tor.
We recommend that the notebook is not operated with the LCD monitor closed when
the notebook is connected to the Port Replicator. T he resulting overhea ting can
cause reduced performance and increased activity of the integrated fan .
PortReplic ato r
► Switch the notebook off.
► Remove the power plug of the mains adapter f rom the mains so cket.
► Disconnect the ma ins adapter cable from the DC socket (DC IN) of the notebook.
1
► Position the n otebook so that it is in line with the back edge of the Port Replicator.
► Push the notebook onto the Port Replicator in th e direction of the arrow
(1) until you notice it engage.
Fujitsu Technology Solutions 47
To Next Page
Loading...
