First-time setup of your device
Switching on the device for the f rst time
Switchingonforthefirst time
On device s with ON/OFF switch for wireless components: Slide the ON/OFF switch
for w ireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this pro cedure must not be interrupted,
you should set aside e nough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, he lp programmes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/suppor t".
Fujitsu Technology Solutions 17
To Next Page
Loading...
