Removing and installing components
during servicing
Installing a memory module
2
a
1
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
1
► Place the cover in the correct slot (1).
If you remove more than one component at the same time, keep the screws for the
individual components separate from each other and make sure that you use the c orrect
screws. If you install the wrong screws, components may be damaged.
► Tighten the screw (2).
68 Fujitsu Technology Solutions
To Next Page
Loading...
