Working with the notebook
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalofda tacarrier
In the event of a power failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your notebook off.
► Push a pe n or a p iece of wire (su ch as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Removing and f tting the dust removal cover
(ventilation slot cover)
In order to ensure optimum cooling of the components in your notebook, you
should periodically clean the v entilation slot of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small ha nd-he ld vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use a ny cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for
removal, see c hapter "
Prep aring to remove comp onents", Page 66.
36 Fujitsu Technology Solutions
To Next Page
Loading...
