Connecting external devices
Connecting external devices
Always refer to the safety information provided in "I mporta nt notes", Page 12 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you w ish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in orde r, when connecting or disconnecting
devices to your notebook:
With some devices such as USB device s, it is n ot necessary to switch off
the notebook and the device before con nect ing/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device do cume ntation).
Connecting devices to the notebook
1. Turn off your notebook and a ll external devices.
2. Unplug your not
ebook and all devices from the mains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power
cables into the ma ins sockets.
DevicesPeripheral de
vices
Disconnecting devices from the notebook
1. Turn off your notebook and a ll external devices.
2. Unplug your
notebook and a ll devices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPeripheral devices
Fujitsu Technology Solutions 59
To Next Page
Loading...
