Fujitsu CELSIUS H720 - Virus Warning (Device-Dependent)

Security functions
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we recommend that
you print out the following instructions. Because you cannot call the instructions
onto the screen w hile you are setting up the password .
BIOSSetupUtility
You prevent unauthorised use of the BIOS Setup Utility with both the supervisor an d the user
password. The supervisor password gives you access to all fun ctions of the BIOS Setup
Utility, while the user password only provides some of the functions. You can only set a
user password if a superviso r password has already been assigned.
Please refer to the "Settings in BIOS Setup Utility", Page 73 sectio n for a
description of how to call up and ope rate the BIOS Setup U tility.
Setting supervisor and user password
► Start the BIOS Setup
Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Pass
word: you are asked to enter a p assword.
► Enter the password and press the Enter k ey.

Confirm ne w Passwo
rd requires you to confirm the password.
► Enter the pa ssword again and press the En ter key.

Changes have be
en saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.

Ifyoudonotwa
nt to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes an
d press the Enter key.
PasswordSupervisorpas swordUserpassword

The notebook will be rebooted and the new password will come into effect. It will now be
necessary to first enter your supervisor or user password in order to open the B IOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing t
he supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the s upervisor password.
Passwo
rd
Superv
isorpassword
Userpa
ssword
► Call the BI OS Setup Utility andgototheSecurity menu.
► When cha
nging the password, proceed exactly as for password assignment.
52 Fujitsu Technology Solutions