Fujitsu CELSIUS H720 - The LCD Screen is Difficult to Read; The External Monitor Remains Blank; The External Monitor is Blank or the Image is Unstable

Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystems ettings,BIOSSe tup UtilityConfiguration, B IOSSetupU tilitySetupSystemcon figurationHardwareconfiguration
The BIOS Setup Utili ty allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to fact o ry default setting s. You can
change these settings in BIOS S etu p Utility. A ny cha nges yo u make take effect as
soon as you save and exit the B IOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
About
Displays information relating to the BIOS, processor a nd notebook
System
Advanced system settings
Advanced
Configuration of va
rious hardware components, such as mouse, keyboard,
processor
Security
Password s ettings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BI OS Setu p Utility
Starting the BIOS Setup Utility
► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtili
ty

The following or a similar display appears on the screen at start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a password has been assigned, enter the pa ssword and press the Enter key.
If you have forgotten th e password, contact your system administrator
or contact our customer service centre.
The BI
OS Setup Utility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the
F1
key to d isplay help on the operation of the BI OS S etu p Utility. The d escription
of the individual settings is shown in the right-hand window of the B IOS Setu p Utility.
With the
F9
key you can load the default settings of the BIOS Setup Utility.
► Use the cursor keys
←
or
→
to select t he menu you wish to access to make changes.

The menu is displayed on the screen.
► Select the option you wa nt to ch ange with the cursor keys
↑
or
↓
.
► Press th e Enter k ey.
► Press the
ESC
key to exit the selected menu.
► For future referen ce, make a note of the changes you have m ade (for example, in this manu al).
Fujitsu Technology Solutions 73