Removing and installing components
during servicing
Removing a cover
1
2
► Remove the screw (1
).
Keep the screws in
a safe place. If you are removing more tha n one component at
the sa me time, sto
re the screws for the individual components separate from each
other. If you ins
tall the wrong screws, components may be damaged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully pu
sh the two mounting
clips outwar
ds (1).
MemoryexpansionMemorymodule
The memory module snaps upwards (2).
► Pull the me
mory module out of its slot
in the dire
ction of the arrow (3).
Fujitsu Technology Solutions 67
To Next Page
Loading...
