Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always take hold of the actual plug w hen disconnecting a cable. Never pull the cable!
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and back of th e device. Not all ports are necessarily present on
your device. The standard ports are marked with the symbols shown below (or similar). Detailed
information on the location of the ports is provided in the manual for the mainboard.
PS/2 keyboard port
Keyboa rdport
Parallel port/printer (optional)
ParallelportPrinter
1
Serial port 1
Serialport
2
Serial port 2
Serialport
VGA monitor port
Monitorport
Microphone port
Microphone jack
Headphones
Headphones
Audio input (Line in)
AudioinputLinein
Audio output (Line out)
AudiooutputLineout
PS/2 mouse port
MouseportPS/2mousepo
rt
USB 2.0 - Universal Serial Bus
Universal
SerialBus
LAN port
LANport
USB 3.0 - Universal Serial Bus
UniversalSerialBus
SCSI connection
DVI-I monitor port DP DisplayPort
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device a nd operating system).
Fujitsu 15