System expansio ns
Installing a hard disk drive
► Op en the casing (see "Opening the casing", Page 34 ).
► Secu re the EasyChange rails to the side of the h ard disk drive by inserting the upper
pins of the EasyChange rail in the corresponding holes o f the hard d isk.
1
► Slide the hard disk drive with the EasyChange rails into the drive cage in the direction of the arrow
(1). Check that the component side of the hard disk drive faces inwards towards t he casing floor.
► Connect the cables to the hard disk drive.
► Cl ose the casing (see "
Closing the casing" , Page 35).
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Fujitsu 47
To Next Page
Loading...
