System expansio ns
Removing a board
► Op en the casing (see "Opening the casing", Page 34 ).
Board
► Disconnect the cables connected to th e board .
1
2
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it tow ards back panel of the device.
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
For c ooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
2
1
2
► Slid
e the slot cover into the slot (1).
Fujitsu 51
To Next Page
Loading...
