Fujitsu CELSIUS W550 - Removing the Hard Disk Drive

System expansions
Removing the hard disk drive
► Open the casing (see " Opening the casing", Page 34).
1
1
2
► Slightly press together the EasyChange rails mounted on the hard disk drive (1) and carefully
pull the hard disk drive slightly out of the drive cage in the direction of the arrow (2).
► Disconnect the cab
les connected to the hard disk drive.
► Slightly press togethe r the EasyChange rails mounted on the hard d isk drive (1) and pull the
hard disk drive completely out of the drive cage in the direction of the arrow (2).
► Pull the E a syChan ge rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
It may be necessary to modify the entry for the drive in the BIOS Setup.
48 Fujitsu