Getting started
If an additional display adapter other than the CPU display adapter is
plugged into the system, only one additional monitor is provided for display
on the onboard display adapter. The two others act a s ServicePorts and
are not intended for simultaneous image playback.
The D isplayPort is the preferred port. Therefore, the cover here can be broken off with
the help of a predetermined breaking point, in order to make the port accessible. If a
DVI or VGA port is required, the display adapter cover m ust be removed.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 m ou se is only detected by the d evice if you connect th e mouse when
the device is switched off and then switch the device on again.
► S witch your devic e
off.
If you do not atta
ch a mouse to the PS/2 mouse port, you can disable the mouse
controller in th
e BIOS Setup in order to free the IRQ12 for a different application.
► Connect the PS/2 mouse to the PS/2 mouse po rt o f the device.
PS/2mouse,Con necting,PS/2mouse,
► Switch your device on again.
Fujitsu 17
To Next Page
Loading...
