Fujitsu CELSIUS W550 - Removing and Installing the Memory Card Reader (Optional, 3½ Inch, Multicard); Installing the Memory Card Reader

System expansions
Removing and installing the mem
ory card reader
(optional, 3½ inch, MultiCard)
You can also install a memory ca
rd reader or a S martCa rd rea der and/or a WLAN module for
wireless LAN (Local Area Netw
ork) in the drive bay for 3½ inch drives ( se e "
Install ing/removing
the SmartCard reader a nd/or W
LAN module (optional, 3½-Zoll)", Page 39).
The memory card reader can
, unlike the SmartCard reader and WLAN module,
be installed directly in t
he device without a module holder.
Installing the memory c
ard reader
2
2
1
► Push the memory card reader into the casing in the direction of the arrow (1).
► Fasten the memory card reader with the screws (2).
► Connect the cables to the memory card reader and to the mainboard.
Make sure the polarity is correct.
► Close the casing (see "
Closing the casing" , Page 35).
44 Fujitsu