Fujitsu CELSIUS W550 - Removing the Module Holder; Screwing the WLAN Module Onto the Module Holder

System expansions
Removing the module ho lder
► Open the casing (see " Opening the casing", Page 34).
► Disconnect the cables connected to the module holder.
1
1
2
► Remove the screw s (1) on the module holder.
► Push the module holder out of the casing in the direction of the arrow (2).
Screwing the WLAN module onto the module holder
2
a
a
1
2
► Push the WLAN module - w ith the
component side facing downwards - in
the direction of the arrow (1) into the
guide on t he module h older (a).
► Fasten the WLAN module w ith the
screws (2).
40 Fujitsu