Fujitsu CELSIUS W550 - Screwing the Smartcard Reader Onto the Module Holder; Installing the Module Holder with Smartcard Reader And;Or WLAN Module

System expansio ns
Screwing the SmartCard reader onto the module holder
2
2
a
a
1
► Push the SmartCard reader - with the
component side facing downwards - into
the guide o n the module holder (a) in
the direction of the arrow (1).
► Secure the Sm ar tCard reader with
the screws (2).
Installing the module holder with SmartCard reader
and/or WLAN module
2
2
1
► Push the module holder into the casing in the direction of the arrow ( 1).
► Fasten th
e module holder with the screws (2).
► Connect the cables to the boards and the m ainboard. Make sure the polarity is correct.
► Close t
he casing (see "
Closing the casing" , Page 35).
Fujitsu 41