System expansio ns
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Installing/removing the Sma
rtCard reader and/or
WLAN module (optional, 3½-Zoll)
You can also install a Smar
tCard reader and/or a WLAN module for wireless LAN (Local Area
Network) or a memory card
reader in the drive bays for 3½ inch drives (see "
Removing and
installing the memory ca
rd reader (optional, 3½ inch, MultiCard)", Page 44).
The SmartCard reader an
d WLAN module can be installed together in one
module holder ( optiona
l). If you have ordered a device with a W LAN module
and SmartCard reader,
the module holder, SmartCard read er and WLAN
module w ill already b
e installed at the time of delive ry.
However, you can onl
y install one of the tw o boards. The WLAN module is installed
in the lower slot of t
he carrier and the SmartCard reader in the upper slot of t he
carrier. If you wan
t to install the SmartCard reader and the WLAN module together,
first install the WL
AN module. Removal is performed in the reverse order.
If you have ordere
d a device without a W LAN module or SmartCard re ader,
a blind cover is in
stalled inst ead of the module holder.
Installing/re
moving a 3½" reader in a 3½" bay
(optional, SmartCard o r MultiCard)
The following
chapter illustrates the standard version and not the power version. However,
the procedure
in the following chapters is the same for both versions.
Operation o
f the module is not permitted in Taiwan.
You can for i nstance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a m o dule holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device with a SmartCard o r MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard reader, a
blind cover is installed instead of the module holder.
Fujitsu 39
To Next Page
Loading...
