FUJITSU DL3100
User’s Manual 6-3
Illustrations for above step 1 and step 2.
4. Follow the given prompt to unload the conversation form. Load
the customized form to allow the printer to scan the page length.
After the measurement, load another conversation form to let the
printer print out the measured length.
The measured form length is: 11.0Inch, approximately equal to 279mm,
accuracy of plus or minus 0.1 inches.
The measured value has been saved.
Remeasure([LOAD/EJECT]=OK,[ONLINE]=Exit)?
Yes
5.At this stage:
If [Load/Eject] is pressed, an asterisk “*” is appended to “Yes”
and you should repeat the procedures for form length
measurement as mentioned. Or, If you input “Exit”, the printer
saves the measurement value and proceeds with the next
customized setting.
To Next Page
Loading...
Need help?
General
