Fujitsu DL3100 - IBM Emulation Command List

FUJITSU DL3100
User’s Manual C-27
Function
Command
Mechanical control
Beeper
BEL
Beeper
ESC BEL
Turn unidirectional mode on/off
ESC U (n)
n = 0 Bidirectional printing
1 Unidirectional printing
Moving the print position
Carriage return
CR
Carriage return
ESC CR
Line feed
LF
Line feed
ESC LF
Form feed
FF
Form feed
ESC FF
Tab horizontally
HT
Tab horizontally
ESC HT
Tab vertically
VT
Tab vertically
ESC VT
Backspace
BS
Backspace
ESC BS
Automatic Line Feed
ESC 5 (n)
n = 0 To end automatic line feed (LF) on carriage
return (CR) (CR= CR)
1 To begin automatic line feed (LF) on carriage return
(CR)( CR = CR+LF)
Move Current Print Position
This command moves the current print position to the
right in increments of 1/120 inch.
ESC d (nL)
(nH)
Current Print Position = (nH × 256) + nL)
Move Paper Vertically
ESC J (n)
Advances the paper in a vertical movement a distance of
n/216 inches relative to the current print position.
Reverse Line Feed
ESC ]
IBM
EMULATION
COMMAND
LIST