Fujitsu DL3100 User Manual

FUJITSU DL3100
User’s Manual 7-5
REPLACE THE
RIBBON
There are two ways of replacing the ribbon. You can install
a new ribbon cassette in the printer or refill the old ribbon
cassette with new fabric. Chapter A lists order numbers for
ribbon cassettes. The following procedure is for ribbon
cassettes.
CAUTION<HOT>
The print head and metal frame is hot
during printing or immediately after
printing. Do not touch them until it cools
down.
To replace the ribbon cassette:
1. Turn off the printer.
Note: If the power is turned off during or immediately
after printing, turn on the power again. Verify that the
print head has moved to the ribbon replacement
position, and then turn off the power again.
2. Open the front cover of the printer. Please make sure
that the printer head stops at the ribbon replacement
position.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English