FUJITSU DL3100
6-6 User’s Manual
CUSTOMIZE
FANFOLD
PAGE
FORMATTING
PARAMETERS
The customizations of the form length, TOF, bottom and left
margins for fanfold are exactly the same as describe. All you
need is to bypass the Single Sheet menu under Customize
Form. Follow step 1 in section 6.1:
[LF]=Next, [TEAR]=Back, [LOAD/EJECT]=OK, [ONLINE]=Exit,
[ONLINE]+[LOAD/EJECT]=Save and restart the printer.
Single sheet
Then hit “Next” instead to get into the fanfold parameter
menus:
Form Length
Refer section 6.1 to 6.4 for details on customizing the form
length, TOF, bottom margin, and left margin for fanfold.
To Next Page
Loading...
