FUJITSU DL3100
User’s Manual 6-5
CUSTOMIZE
CUT SHEET
BOTTOM
MARGIN
CUSTOMIZE
CUT SHEET
LEFT MARGIN
1.After you follow through all the steps in 6.2 or you input
“Next” twice in step 3 in 6.1, the printer prompts:
2. The remaining operations are nearly the same as described
in section 6.2. The only difference is to input +/- 1/180” till
you get the desirable bottom margin.
1.After you follow through all the steps in 6.3 or you input
“Next” three times in step 3 in 6.1, the printer prompts:
2.The remaining operations are nearly the same as described
in section 6.2. The only difference is to input +/- 1/180” till
you get the desirable left margin.