FUJITSU DL3100
User’s Manual 4-7
PANEL
OPERATION
There are 3 states of operation: Online, Setup and Power
On.
In the Online state, the keys provide the following
functions: Go to Tear Off position, Line Feed/Form Feed,
Load/Eject, Clear Buffer and switch to offline state for
accessing to Setup state.
In the Setup state, the keys provide font selection, micro
feed and quiet mode printing.
To enter the Power On state, the user holds down a key or a
combination of keys while powering up the printer. This
state provides the following functions: Hex-dump, Main
Menu setup, print Main Menu, print lift-time information,
Customize Form.
The followings describe the 3 states in details.
Legend:
[A] = press and hold switch A
{B} = press and then release switch B
[A]+ {B} = press switch B while holding A
To Next Page
Loading...
