Fujitsu DL3100 - FUNCTIONAL SPECIFICATIONS

FUJITSU DL3100
B-2 User’s Manual
FUNCTIONAL
SPECIFICATIONS
Print method Impact dot matrix with a 0.20 mm,
24-wire head
Print direction Bidirectional logic-seeking or
unidirectional seeking
Character cell Horizontal × vertical
LQ (10cpi):
24 × 24 dots
NLQ (10cpi):
18 × 24 dots
Draft (10cpi):
12 × 24 dots
High speed draft (10cpi):
8 × 24 dots
LQ (12cpi):
30 × 24 dots
NLQ (12cpi):
15 × 24 dots
Draft (12cpi):
10 × 24 dots
High speed draft (12cpi):
10 × 24 dots
LQ (15cpi):
24 × 24 dots
NLQ (15cpi):
12 × 24 dots
Draft (15cpi):
8 × 24 dots
High speed draft (15cpi):
8 × 24 dots
LQ (17.1cpi):
21 × 24 dots
NLQ (17.1cpi):
11 × 24 dots
Draft (17.1cpi):
11 × 24 dots
High speed draft (17.1cpi):
11 × 24 dots
LQ (20cpi):
18 × 24 dots
NLQ (20cpi):
9 × 24 dots
Draft (20cpi):
9 × 24 dots
High speed draft (20cpi):
9 × 24 dots
Paper handling
Feed method : Friction / Push tractor
Paper pass : Cut sheet (Rear in Top out )
Fanfold paper (Rear in Top out)
Paper type 1 to 5-copies for tractor and paper table