FUJITSU DL3100
5-44 User’s Manual
RESTORE
FACTORY
DEFAULT
The procedures to restore factory default settings:
1. Hold down the [Tear off] key while powering on the printer
and then release the key when the print head starts to move.
After loading paper, the printer prompts the Printer Settings
[LF]=Next, [TEAR]=Back, [LOAD/EJECT]=OK, [ONLINE]=Exit,
[ONLINE]+[LOAD/EJECT]=Save and restart the printer.
System Setup
2. Press the Next or Back keys to scroll forward or backward the
sub-menus till the printer shows:
Restore Factory Defaults
3. Press OK to go into restore factory default dialog. The printer
prompts:
[Restore Factory Defaults]
Restore factory settings ([LOAD/EJECT]=OK,[ONLINE]=Exit)?
Yes
4. At this stage you have the option of OK to restore default
setting or Exit to discard the restoration.
5. If input OK, the printer prints an asterisk “*” appending the
“Yes” and prompts successful restoration:
Restore factory settings successfully
6.The printer beeps once to indicate successful restoration.