FUJITSU DL3100
User’s Manual 5-43
Bi-directional Alignment:
Single paper text LQ (360DPI) -2:
| | | | | | | | | | | | | | |
Single paper text NLQ (180DPI) -2:
| | | | | | | | | | | | | | |
Single paper text Draft (120DPI) -1:
| | | | | | | | | | | | | | |
Single paper text High Draft (80DPI) 4:
| | | | | | | | | | | | | | |
Single paper text Dual density graph (240DPI) -1:
| | | | | | | | | | | | | | |
Single paper graphy LQ (360DPI) -2:
| | | | | | | | | | | | | | |
Single paper graphy NLQ (180DPI) -2:
| | | | | | | | | | | | | | |
Single paper graphy Draft (120DPI) -1:
| | | | | | | | | | | | | | |
Single paper graphy High Draft (80DPI) 4:
| | | | | | | | | | | | | | |
Single paper graphy Dual density graph (240DPI) -1:
| | | | | | | | | | | | | | |
Mutilayer paper LQ (360DPI) -2:
| | | | | | | | | | | | | | |
Mutilayer paper NLQ (180DPI) -2:
| | | | | | | | | | | | | | |
Mutilayer paper Draft (120DPI) -1:
| | | | | | | | | | | | | | |
Mutilayer paper High Draft (80DPI) 4:
| | | | | | | | | | | | | | |
Mutilayer paper Dual density graph (240DPI) -1:
| | | | | | | | | | | | | | |
Note:
a. The adjustment of Single paper text, Single paper graphyand
Mutilayer paper is separate and does not affect each other,
ensuring that the adjustment is consistent with the application.
b. In order to make the printer achieve the desired print effect, it
is recommended that all items be adjusted to the best printing
state when conducting bidirectional testing and longitudinal
correction, instead of tuning one or two.
To Next Page
Loading...
Need help?
General
