FUJITSU DL3100
5-42 User’s Manual
6. When the printing character “|” forms a continuous line, the
bi-directional printing of this pattern has been corrected. Press
[Load/Eject] key , the printer will indicates:
Save the parameter setting
( [LOAD/EJECT] or [ONLINE] = OK ,[LF] = Next)
Press [LF/FF] or [Tear Off] to choose “Yes” or “No”,then press
[Load/Eject] or [Online] to confirm.
7. After exiting the bidirection test and longitudinal correction
mode, select the printer parameter settings.
8. When you finishing the setting, you also can choose
bidirection test and longitudinal correction,the printout is
following:
To Next Page
Loading...
