FUJITSU DL3100
6-8 User’s Manual
The printer returns the paper first,
a. If using the tractor paper, press [Load/Eject] to feed
paper.
b. If using paper is single paper, move the paper feeding
lever until the“ ” appears, Switch to tractor paper,
then press [Load/Eject] button to Load the paper. When
the loading paper is finished, the paper will
automatically go to the tearing position, and then the
paper can be adjusted. The functions of each button are
as follows:
[Tear Off] :reduce 1/180 inch;
[LF/FF] : add 1/180 inch;
[Load/Eject] : Prompt save
[Online] : Prompt save
5. Press [Load/Eject] or [Online] ,the printer will print out:
The defined position is: 16.4mm.
Save the parameter settings
([LOAD/EJECT] or [ONLINE]=OK, [LF]=Next)?
Yes
Press [LF/FF] to choose “Yes” or “No”, press [Load/Eject]
or [Online] to confirm and pass to the next set.
To Next Page
Loading...
Need help?
General
