Fujitsu DL3100 User Manual

FUJITSU DL3100
User’s Manual 8-3
Problem Solution
Printing is vertically misaligned
(jagged).

Use the printer's vertical alignment
function to check the vertical print
alignment. If necessary, adjust the
print alignment.
The top margin is wrong.

Check whether the application top
margin setting and the setting of
top margin is correct,and enter the
margin setting again.
 Adjust the Top Margin setting in
Page Setup menu if necessary.
Lines are double spaced instead
of single spaced

Change the Auto LF setting in the
System Setup menu to No.
The printer overprints on the
same line.

Change the Auto CR setting in the
System Setup menu to No.
The next print line starts where
the previous line ended instead
of at the left margin.

Change the Auto CR setting in the
System Setup menu to Yes.

Fujitsu DL3100 Specifications

General

Brand	Fujitsu
Model	DL3100
Category	Printer
Language	English