FUJITSU DL3100
User’s Manual 4-5
3.“Load/Eject” Key:
Load: Automatically loads the paper (according to path
selection) when no paper is on the platen.
Eject: For rear tractor, it retracts the form from the platen to
allow users to install cut sheets. (NOTE: Users have to toggle
the path selection lever.) For cut sheets, it ejects the form on
the platen.
When paper is loaded, pressing this key will eject the paper
(single sheet mode) or park the paper (continuous paper
mode). When paper is not loaded, pressing this key will load
the paper to the starting print position.
4.“Online” Key:
Toggles between Online and Offline states.
This key switches the printer between online and offline
states. Printing is stopped when the printer is switched to
offline state. When printer is switched to online state again,
printing will resume.
To Next Page
Loading...
