FUJITSU DL3100
User’s Manual v
ORGANIZATION
This manual is organized as follows:
Chapter 1, Unpacking Guide, introduces the good location for place
printer,unpacking the printer,the printer components, the explanation of
symbols on the printer.
Chapter 2, Setting Up Printer, gives step-by-step procedures for
setting up the printer for immediate use and identifies the main parts of
the printer. If this is your first printer, you should read the entire
chapter before attempting to use the printer.
Chapter 3, Paper Installation Guide, explains how to load and use
paper with your printer.
Chapter 4, Control Panel Operation, covers basic printing
operations. This chapter describes everyday operations from the
printer’s control panel, such as loading paper and selecting print
features, in detail.
Chapter 5, Printer Setting Changes, describes how to change the
printer’s optional settings, such as print features, hardware options, and
top-of-form. Most settings only affect print features such as the
typestyle and page format. Note that certain settings directly affect
hardware and software compatibility.
Chapter 6, Customized Form, explains the customization on the form
length, TOF, bottom margin and left margin for single sheets and
fanfold..
Chapter 7, Maintenance, explains basic maintenance procedures for
this printer.
Chapter 8, Trouble-Shooting, describes problem-solving techniques.
Before you contact your dealer for help, check the list of problems and
solutions provided in this chapter.
At the end of this manual, you will find several chapters, a glossary.
Chapter A gives order numbers for printer supplies.
Other chapters provide additional technical information about the
printer.
To Next Page
Loading...
Need help?
General
