PC Specialist's Handbook ErgoPro e-, x- and s- Series
First Edition, Release 4 - June 1998 Page 85
SIMM recommendations
s-, x- and e-series
SIMM size
(MB)
Description Speed Type Pins Module Kit code
4 1M*32 70ns Fast Page 72 AF33256 PL060093
8 2M*32 70ns Fast Page 72 AF33291 PL060091
16 4M*32 70ns Fast Page 72 AF33258 PL060095
32 8M*32 70ns Fast Page 72 AF33259 PL060096
4 1M*32 60ns EDO 72 AF33800 PL060125
8 2M*32 60ns EDO 72 AF33810
16 4M*32 60ns EDO 72 AF33802 PL060127
32 8M*32 60ns EDO 72 AF33803 PL060128
Explainations of the terms :
Speed: This is the slowest access speed that can be used. When using Fast Page mode SIMMs or Fast
page and EDO SIMMs at the same time, the chipset is using 70ns timing parameters (it doesn't
matter what speed of SIMMs are installed). When using only EDO SIMMs, the chip set is using
60ns timing parameters.
Module: Product code which is used to identify spares numbers and correct SIMM brands used with these
machines.
Kit code: This is the code that can be used when ordering memory upgrades. Note that the kit code is only
for one SIMM module. So, in case of Pentium, 2 kits must be ordered.
To Next Page
Loading...
Need help?
General