EasyManuals Logo

Fujitsu ErgoPro e Series User Manual

Fujitsu ErgoPro e Series
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
PC Specialist's Handbook ErgoPro e-, x- and s- Series
First Edition, Release 4 - June 1998 Page 31
Hard disk time-out
This parameter allows you to specify an amount of time after which the hard disk (fixed disk drive) powers down if
it has not been accessed during this Hard disk time-out value. Press ENTER on the parameter, and an entry
window appears in which you can type in the amount of time in minutes.
Defining a value of 0 (zero) disables this parameter, taking the hard disk drive out of power management control.
Screen time-out
Use this parameter to specify the amount of time after which the screen blanks if there has not been any mouse
or keyboard activity during this Screen time-out value. Press ENTER on the parameter, and an entry window
appears in which you can type in the amount of time in minutes.
This time-out value can be controlled by changing:
this Screen time-out parameter in the User-Power menu,
the Time-out value in the Security level parameter of the User-Security menu and
the Monitor time-out in the PowerMASTER Windows graphical user interface.
Defining a value of 0 (zero) disables this parameter, taking the display out of power management control.
Admin menu
The Administrator menus are active when the cursor highlights the word Admin. If a System password is set, only
those who have knowledge of this password can modify the parameters in this menu; see Admin-Security menu
later in this chapter for more information.
The Admin menu has three to four sub menus, depending upon your system configuration, and their functions in
brief are outlined below.
Config
Configure the operation of memory devices and communication ports.
Security
Set protective measures such as a system password, device boot up order and password length.
Module
Enable and disable BIOS modules, move modules within the option ROM area and examine the
addresses of your system configuration.
Misc
Enable and disable : - Internal & External Cache of the CPU
- PCI Mach64 reloc I/O
- PCI VGA Palette snooping
PCI
Enable and disable IRQs of the PCI devices and to see installed PCI devices.
Admin-Config menu

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ErgoPro e Series and is the answer not in the manual?

Fujitsu ErgoPro e Series Specifications

General IconGeneral
BrandFujitsu
ModelErgoPro e Series
CategoryDesktop
LanguageEnglish

Related product manuals