Important notes
Transporting the device
DeviceTran sporta tionRe-transportation
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
If the device is brought from a c old environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temperature and it is absolutely dry.
Cleaning the device
Device,Tran sporta tionRetransportationSystemunit,see Devic
e
Turn off all power and equipment sw itches and disconnect the power
plug from the m ains outlet.
Do not clean any interior parts yo urself, leave this job to a s ervice technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or ace tone).
Never clean the device with water! Water en tering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
Thesurfacecanbe
cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mil
d domestic detergent and then carefully wrung out.
Use disinfecta
nt wipes to clean the keyboard and the mouse.
Energy saving, disposal and recycling
DisposalEnergysavingRecycling
You can find information on these subjects on the R ecovery DVD or on our website
("
http://www.fujitsu.com/fts/about/fts/ environment-care/").
Fujitsu 13
To Next Page
Loading...
