Getting started
Connecting external devices to the USB ports
USBdevicesUSBportExternaldevicesDevices
You can connect a w ide range of external devices to the USB port s (e.g.
printer, scanner, modem or keyboard).
USB devices and hot plug-enabled. This means you can connect an d disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB port s on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the Operating System. If the device requires separate software, please follow
the instructions in the manufacturer’s docume ntation.
Connect a second mo
nitor to the display port
DisplayPort
You can connect a second monitor via the DisplayPort.
► Connect the data cable to your
ALL-IN-ONE PC
► Connect the dat
acabletothedisplay
port of the seco
nd monitor.
Fujitsu 27
To Next Page
Loading...
