Getting started
Switchingonforthefirst time: installing the software
Installing,Software,Installing,
Once the installation ha s been started the device m ust not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrat
ed into a network, the user and server details as well as
the network pro toco l ar
e required during the software installation.
Contact your network ad
ministrator i f you have any questions about these s ettings.
When you switch on the d
evice for the first time, the supplied software
is installed and config
ured. Plan a reasonable amount of time for this,
as this process m ust n
ot be interrupted.
Switch the device on
In order to avoid overheating, do not cover the ventilation a reas of the device.
► Switch the devi
ce off at the main switch.
Themainswitc
h is located on the rear of the device under a cover (see "
Rear", Page 9).
In delivery st
atus, the main switch is at position "I".
1
► Press the ON/OFF switch on the front of the device.
The power indicator glows and the device starts.
Fujitsu 29
To Next Page
Loading...
