Operation
Operation
Switch the device on
In order to avoid overheating, do not cover the ventilation a reas of the device.
► If necessary, switch the device off at the ma in switch.
The main s witch is located on the rear of the device under a cover (see "Re ar", Page 9).
► Press the ON/OFF switch on the front of the device.
The power indicator glows and the device starts.
Switching the de
vice off
► Shut dow n the operating system in the proper way. With Windows: in
the Start menu via the Exit function.
DeviceMonitor
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is ready-to-use, t he device consumes a minimum of energy.
► Switch the device off at the main switch.
The device no longer uses any power.
The main switch and the ON/OFF switch do not disconnect the
device from the mains voltage.
► For complete disconne ction from the mains voltage, pull the mains plug out of the socket.
Fujitsu 31
To Next Page
Loading...
