Fujitsu ESPRIMO K55x/24 Series - Settings in BIOS Setup Utility; Starting the BIOS Setup Utility

Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOS SetupUtilitySetupSystem configurationHardwareconfiguration
The BIOS Setu p Utility allows you to s et the system functions and the
hardware c o nfiguration for your device.
When it is supplied, the device is s et to factory default settings. You can change
these settings in the BIOS Setup Utility menu. Any changes you make take effect
as soon as you save and exit the BIOS Setup Utility.
The BIOS Setu p Utility program contains the following men us:
Menu Description
Main
System settings such as
time and date
Advanced
Advanced system setti
ngs
Security
Password settings and security functions
Power
Energy saving function
Event Logs
Protocol settings
Boot
Configuration of t
he start-up se quence
Save & Exit
Exits the BIOS Se
tup Utility
The following function keys can a lso be used:
Key Description
Esc
To ex it t he BIOS Setup Utility.
The current settings are not saved.
F2
To reject chang es and load the previous config uration of the BIOS Setup
Utility.
F3
To load the
default configuration of the BIOS Setup Utility.
F4
To ex it t he
BIOS Setup Utility.
The cu rre
nt settings are saved.
Starti
ng the BIOS Setup Utility
► Start the device (switch off/on or reboot the Operating System).
BIOSSetupUtility

Depend
ing on the setting for Fast Boot in the BIOS Setup Utility the following display,
if app
licable, appears on the screen on start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a p
assword has been assigned, enter the password and press the Enter key.
If y
ou have forgotten the password, contact your system administrator
or c
ontact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu 37