Getting started
Settingupthedevice
WorkstationErgonomicD evice
When installing your device, please read the r eco mmendations and safety
notes in the "Safety/regulations" manual.
We recommend that you p lace your device on a surface which is not slippery. In
view of the m any different fi nishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 " should b e m aintained
from other devices on casing sides without ventilation su rfaces.
In order to avoid overheating, do not cover the ve ntilation areas
of the monitor or the device.
A minimum distance of 200 m m / 7.87" from th e device must be
observed for ventilation areas.
Do not expose the device to extreme ambient conditions (see "
Technical data", Pag e 59,
section "Ambient con ditions"). Protect the device against dust, humidity and heat.
When the lighting conditions are unfavourable ( for instance direct s unlight), reflections
may occur which can cause the displayed characters to be difficult to read. Suitable
ambient lighting is necessary to avoid these kinds of reflections.
In addition, align your system according to the ambient lighting conditions, for instance
by changing the p osition of th e display (horizontal or vertical angle).
Setting up an ergonomic video workstation
1
► Do not position the video workstation
opposite a window (1).
Fujitsu 15
To Next Page
Loading...
