Getting started
Connecting the power cable
Preparingforo perationPowercable
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The s upplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
2
1
► Connect the power cable to the power connector (1) of the device.
► Plug the mains supply plug into an earthed mains supply socket (2).
Connecting external devices
Read the documentation o n the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not co nnect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
To ensure that your device works properly, only use the connection cable
supplied or only use a high-quality connection cable.
24 Fujitsu
To Next Page
Loading...
