Getting started
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and rear of the device. The ports available on
your device depend on the configuration leve l you have selected. The sta ndard ports
are marked with the symbols shown below (or similar).
DP DisplayPort
DisplayPort
USB 3.0 - Universal Serial Bus, blue
(device-dependent)
Audio output (Line O ut)
AudiooutputLineout
LAN port
LANport
Audio input (Line in)
Audioinput
PS/2 mouse port, green
PS/2mouseport
Serial port
Serialport
PS/2 keyboard port, purple
PS/2keybo ardport
USB 2.0 - Universal Serial
Bus, black
UniversalSerialBus
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device a nd operating system).
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 m ou se is only detected by the d evice if you connect th e mouse when
the device is switched off and then switch the device on again.
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Con necting,PS/2mouse,
► Switch yo
ur device on again.
Fujitsu 25
To Next Page
Loading...
