EasyManua.ls Logo

Fujitsu ETERNUS AB Series - Controllers; Controller Overview and Replacement Requirements

Fujitsu ETERNUS AB Series
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. ETERNUS AB/HB Installation
Installation Specifications
Site Planning Guide
14
*1: A 2U power distribution unit is composed of two 1U power distribution units.
*2: These values are for each shelf when 24 drives are installed in a 2.5" type shelf or 12 drives are installed in
a 3.5" type shelf.
*3: The value in the parentheses for the controller shelf and drive shelves includes the mass of the rack rail kit.
*4: These values are for the maximum load when all the available options are installed in a 2.5" type or 3.5"
type ETERNUS AB/HB.
*5: The operating test was performed in environments compatible with the Operating Condition Class A4 of
the EU eco-design directive (ErP Directive 2009/125/EC).
*6: The operating test was performed in environments compatible with the Operating Condition Class A3 of
the EU eco-design directive (ErP Directive 2009/125/EC).
*7: For details about the sound level of the drive shelf, refer to "Table 8
Sound Level of the Drive Shelf" (page
14).
Table 8 Sound Level of the Drive Shelf
Maximum
amount of
exhaust air
Controller shelf - -
Drive shelf - -
Environmental
conditions
Temperature Operating 5 – 45 °C (*5) 5 – 40 °C (*6)
Not operating -40 – 70 °C
During shipment -40 – 70 °C
Temperature gradient 15 °C/Hr or less
Humidity Operating 8 – 90 %RH (*5) 8 – 85 %RH (*6)
Not operating 5 – 95 %RH
During shipment 10 – 95 %RH
Humidity gradient 30 %/day or less
Maximum wet bulb temperature 29 °C
Altitude above sea level 0 – 3,048 m
Airborne dust
0.15 mg/m
3
or less
Gas concentration tolerance level Cl
2
: 6.8 ppb or less, H
2
S: 7.1 ppb or less,
SO
2
: 37 ppb or less, NH
3
: 423.5 ppb or less,
NO
2
: 52.3 ppb or less, O
3
: 5 ppb or less,
HCl: 6.6 ppb or less, HF: 3.6 ppb or less
Oil vapor
0.2 mg/m
3
or less
Seawater (salt corrosion) If the ETERNUS AB/HB is installed on the
ocean or premises within 0.5 km from the
coast, necessary measures must be taken
to prevent salt corrosion.
Noise
emission (*7)
Sound pressure level 64 dBA
Sound power level 6.4 B
DE212C DE224C
Sound pressure level 64 dBA 51 dBA
Sound power level 6.4 B 6.7 B
Item ETERNUS HB1100 ETERNUS HB1200

Table of Contents

Other manuals for Fujitsu ETERNUS AB Series

Related product manuals