Fujitsu ETERNUS AB Series - Specifications for Optional Power Supply Products; Table 23 Specifications for AC250 V Power Cords (IEC60320 C13 - NEMA L6-15 P); Table 24 Specifications for AC250 V Power Cords (IEC60320 C19 - C20); Table 25 Specifications for AC250 V Power Cords (IEC60320 C19 - NEMA L6-20 P)

1. ETERNUS AB/HB Installation
Outlet/Socket Specifications
Site Planning Guide
40
Specifications for Optional Power Supply Products
This section explains the specifications of optional power cords and power related optional prod-
ucts for the ETERNUS AB/HB.
When using power distribution units, take the number of outlets required to connect each shelf into
consideration to select the most appropriate power distribution units.
When an existing power socket is used, make sure that the plug type of the power distribution unit
fits the existing power socket and that the power supply facility is able to provide sufficient power
to the system. If the plug type does not fit the power socket, electrical work to change the power
socket is required. This electrical work must be performed in compliance with the electrical codes
of the nation, the municipality, or the region.
■ AC200V Power Cords
AC200V power cords are used to connect devices to the NEMA L6-15R power socket type. These
power cords can be used if the specifications of the connection device allow AC200V.
Table 23 Specifications for AC250V Power Cords (IEC60320 C13 - NEMA L6-15P)
AC200V power cords are used to connect devices to the IEC60320 C19 power socket type.
These power cords can be used if the specifications of the connection device allow AC200V.
Table 24 Specifications for AC250V Power Cords (IEC60320 C19 - C20)
AC200V power cords are used to connect devices to the NEMA L6-20R power socket type.
These power cords can be used if the specifications of the connection device allow AC200V.
Table 25 Specifications for AC250V Power Cords (IEC60320 C19 - NEMA L6-20P)
Usage
Plug type
(Socket)
Socket type
(Power supply unit)
Power cord
length
Voltage rating/
current rating
Used for connection between
the ETERNUS AB/HB and the
socket
(IEC60320 C13 <-> NEMA L6-
15P)
NEMA L6-15P IEC60320 C13 4.0 m 250V/10A
Usage
Plug type
(Socket)
Socket type
(Power supply unit)
Power cord
length
Voltage rating/
current rating
Used for connection between
the ETERNUS AB/HB and the
socket
(IEC60320 C19 <-> IEC60320
C20)
IEC60320
C20
IEC60320 C19 3.0 m 250V/16A
Usage
Plug type
(Socket)
Socket type
(Power supply unit)
Power cord
length
Voltage rating/
current rating
Used for connection between
the ETERNUS AB/HB and the
socket
(IEC60320 C19 <-> NEMA L6-
20P)
NEMA L6-20P IEC60320 C19 3.0 m 250V/16A