Fujitsu ETERNUS AB Series - Load Bearing Capacity for Floors; Figure 17 Floor Dimensions of the Rack (of 19-Inch Wide Racks)

1. ETERNUS AB/HB Installation
Installation Environment
Site Planning Guide
38
Figure 17 Floor Dimensions of the Rack (of 19-inch Wide Racks)
Load Bearing Capacity for Floors
Make sure that the following relationship between the load bearing capacity of the floor and the
weight of the ETERNUS AB/HB is maintained.
(Load bearing capacity of the floor) > (ETERNUS AB/HB weight  Installation area that includes
service areas)
If the condition above is not satisfied, additional measures are required to ensure sufficient load
bearing capacity.
Contact your installation contractor for details about the necessary measures that must be taken.
1,093.6 mm (leveling feet)
906.8 mm (caster)
Front Rear
623 mm (caster)
670 mm (leveling feet)
800 mm
1,200 mm
65 mm
88.5 mm
53.2 mm
146.6
mm
Caster
Leveling feet
Cable slot