Fujitsu ETERNUS AF250 S2 - Drive Enclosure Drives

■
Drives
Figure 20 shows the drive. Figure 21
shows the slot number of each drive.
Table 8 shows the status and meanings of each LED.
Figure 20 Drives
1 2
1. DRIVE READY LED
2. DRIVE FAULT LED
Figure 21 Drive Slot Numbers (Drive Enclosure)
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 8 Status and Meanings of Each LED (Drive)
LED name LED status Meanings
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
•
The drive is in error status.
•
The LED light up operation was performed from the ETERNUS
CLI command line in order to identify the drive location.
1. Component Names and LED Names
Drive Enclosures
24
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0